Fortel DTV FS-512 Video Decoder/Synchronizer Module

Description

Fortel DTV FS-512 Video Decoder/Synchronizer Module
Description
Used,
excellent condition
Guaranteed
Working
Module was pulled from working equipment. Cosmetic condition is very good with light signs of use.
What’s Included:
1x Fortel DTV Video Decoder/Synchronizer Module
Does not include any additional cables, parts or accessories.
Description
The FS-512 synchronizes analog or digital video signals to a video reference and provides two SDI outputs and two analog outputs from the selected input. Operable in NTSC/525 or PAL/625 mode, it provides world class decoding of composite analog to SDI, never before possible.
QuadraComb™, the industry’s first 4-D digital comb filter
QuadraComb™goes beyond 3-D digital comb filters by applying additional spatial and temporal error detectors. The resulting information provides better control of the comb filter and drives comb filter processing. This dynamic logic in Quadra-Comb™eliminates problems inherent in 3-D combing. Cross-color and hanging dot artifacts are greatly reduced beyond other techniques, retaining the finest details and textures normally lost by other comb filters.
Advanced features included are VITS generation/insertion, add/remove setup, full frame test patterns, time base correction,video AGC and hot switch. A unique, undecoded analog output is selectable,which bypasses the decode/re-encode process entirely, providing composite digital synchronization in parallel with the decoded component digital outputs.
When paired with a DAS-441A audio synchronizer, the combination can provide audio embedding and lip-sync correction.
Features
• Synchronize analog or digital source
• QuadraComb™decoding
• Digital Proc Amp
• Test Pattern Generator
• VITS Generator/Inserter
• Pass or mask data in the VBI
• Exceptional noise immunity
• Freeze Frame or Field
• Time Base Correction
• Video AGC
• NTSC or PAL Operable
• Embed or de-embed audio when paired with DAS-441A
• Lip-sync correction when paired with DAS-441A
Specifications
Video Inputs
Composite analog (BNC): 1 V p-p into 75 Ω
Sampling & processing: 12 bits at 27 MHz
Analog return loss: > 40 dB to 5.75 MHz
SDI (BNC): SMPTE 259M-C
SDI return loss: > 19 dB to 270 MHz
The composite analog input may be relay bypassed to Composite out #1
Video Outputs
Composite Analog (2x BNC): 1V p-p into 75 Ω
Analog return loss: >40 dB to 5.75 MHz
SDI (2x BNC): SMPTE 259M-C
Output SDI clock jitter: <700 pS p-p (wideband, 10 Hz highpass filter)
SDI return loss: >19 dB to 270 MHz
A TTL level audio delay control pulse can be jumpered to replace Composite Output #2 or SDI Output #2
Genlock Reference
Composite analog (2x BNC): 1V p-p (looping input)
Return loss: >40 dB to 5.75 MHz
Noise Handling
The input sync separator and clock generator will capture and maintain lock with noisy inputs that approach 0 dB S/N ratio.
Input Loss Modes
Pass bad video; Cut to black; Kill all outputs; Freeze last good field or Freeze last good field then timeout to black.
Performance
Signal to Noise Ratio: >64 dB (Unweighted luminance)
Luminance Freq. Response: ± 0.05 dB to 5.5 MHz
TBC mode: +0.05/-1.15 dB to 4.0 MHz, - 0.35 dB at 5.0 MHz
Differential Gain: <0.5%
Differential Phase: <0.5°
K Factor (2T): <0.5%
K Factor in TBC ON mode: <1%
Output Timing
H Phase: Infinitely variable
V Phase: Infinitely variable
Residual TBC jitter: < ±3nS
Proc Amp Controls
Video Gain: ± 6 dB
Black Level: ± 100 mV (14 IRE)
Chroma Gain: ± 6 dB
Hue (NTSC only): 45°
Independent proc amp settings are stored for Composite and SDI inputs
Environmental & Mechanical
Power Consumption: 12 W
Operating Temperature: 0° C to +45° C
Humidity: 10% to 95%, non condensing
Card Dimensions: 6.0" x 9.4"(15.2 cm x 23.9 cm)
Payment
Payment via PayPal is expected within 2-days after the winning bid.We only accept bids from US bidders with confirmed PayPal addresses and only accept PayPal as the form of payment.
Returns
Items sold as New, Tested and/or Working may be returned within 30 days of receiving if you are not satisfied with your purchase. Restocking fee may apply. Buyer is responsible for return shipping costs.
Please review all photos carefully as they are part of the description per eBay policy.
Shipping
ARG-Tech directly only ships to the United States. All international shipments are processed through eBay's Global Shipping Program.
We take pride in packing items carefully to ensure safe arrival. We ship promptly, usually same or next day after PayPal confirmation.
If you have any special requirements or questions regarding shipping, please contact us before buying.
Our business hours are Monday – Friday 7AM-4:30PM EST
Thanks for viewing!
Please check out our other items!