-40%
EXTRON SYSTEM 7SC INPUT VIDEO SWITCHER MADE IN USA
$ 34.31
- Description
- Size Guide
Description
HI AND THANK YOU FOR LOOKING HERE IS A (EXTRON SYSTEM 7SC INPUT VIDEO SWITCHER MADE IN USA, USED, INCLUDES POWER CABLE AND INPUT CABLES, IS MISSING THE PLASTIC CAL P THE NO.- 7 CHANNEL SEE PICTURES JUST A COSMETIC LOOK, THIS IS A USED SYSTEM IT HAS NORMAL WEAR AND FULLY WORKS, THIS IS AN EXPENSIVE SYSTEM IT COST OVER 00 NO RESERVE.
) YOU ARE BIDDING ON A USED SWITCHER IF YOU ARE NOT SURE ABOUT THIS ITEM PLEASE ASK QUESTIONS BEFORE PLACING YOUR BID, GOOD LUCK BIDDING.
System 7SC Switcher
Video
Gain
Unity
Bandwidth
350 MHz (-3 dB)
Differential phase error
0.01°, at 3.58 MHz and 4.43 MHz
Differential gain error
0.01% at 3.58 MHz and 4.43 MHz
Crosstalk
-50 dB @ 5 MHz
Video input
Number/signal type
6 RGBHV / RGBS / RGsB / RsGsBs computer video, component video
(interlaced or progressive, 480p only), S-video, or composite video 1 RGBHV / RGBS / RGsB / RsGsBs computer video, S-video, or composite video
Connectors
6 x 5 BNC female RGB computer video, component video, S-video, or composite video
(1)15-pin HD female RGB computer video (input 7)
(1)4-pin mini-DIN female S-video (input 7)
1 RCA female composite video (input 7)
Nominal level
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels
Analog: 0.3 V to 2 Vp-p with no offset
Impedance
75 ohms
Horizontal frequency
15 kHz to 150 kHz
Vertical frequency
30 Hz to 150 Hz
Return loss
<-30 dB @ 5 MHz
DC offset (max. allowable)
1.5 V
Video processing
Decoder
9 bit digital
Digital sampling
24 bit, 8 bits per color; 13.5 MHz (interlaced signals)
24 bit, 8 bits per color; 27 MHz (480p signals)
Colors
16.78 million
Video output
Number/signal type
2 RGBHV / RGBS / RGsB / RsGsBs* computer video
(*RGsB, and RsGsBs will be output only if the input is RsGsBs.)
Connectors
1 x 5 BNC female
(1) 15-pin HD female
Nominal level
0.7 Vp-p for RGB
Minimum/maximum levels
0.0 V to 1.4 Vp-p
Impedance
75 ohms
Scaled VGA resolution
640x480
1,3,4,5
, 800x600
1,3,4,5
, 832x624
3,4,5
, 848x480
3
, 852x480
3
, 1024x768
1,3,4,5
, 1280x768
2
, 1280x1024
1,3,5
, 1360x765
3
, 1365x1024
3,5
, 480p
3,5
, 720p
3,5
, 1080p
3,5
, 1080i
3,5
1
= at 50 Hz,
2
= at 56 Hz,
3
= at 60 Hz,
4
= at 75 Hz,
5
= locked to the current input's vertical refresh rate
Return loss
-30 dB @ 5 MHz
DC offset
±5 mV maximum with input at 0 offset
Switching type
Triple-Action
Sync
Input type
RGBHV, RGBS, RGsB, RsGsBs
Output type
RGBHV, RGBS, RGsB, RsGsBs*
(*RsGsBs is output only if the input is RsGsBs.)
Standards
TTL (RGB)
NTSC 3.58, NTSC 4.43, PAL and SECAM (S-video and composite video)
Input level
0.5 V to 5 Vp-p
Output level
0.5 V to 5 Vp-p, unterminated
Input impedance
510 ohms
Output impedance
75 ohms
Max. input voltage
5 Vp-p
Max. propagation delay
20 ns
Polarity
Positive or negative (follows input)
Audio
Gain
+0 dBu unbalanced, +6 dBu balanced
Frequency response
20 Hz to 20 kHz, ±0.05 dB
THD + Noise
<0.03% @ 1 kHz at nominal level
S/N
>90 dB at rated maximum output (+21 dBu)
Crosstalk
<-80 dB @ 1 kHz, fully loaded
Stereo channel separation
>90 dB @ 1 kHz
CMRR
>75 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type
6 stereo, balanced/unbalanced (rear panel)
1 stereo, unbalanced (front panel)
Connectors
(6) 3.5 mm captive screw connectors, 5 pole, and
(1) 3.5 mm mini stereo jack (unbalanced), or
2 RCA female (white = L, red = R)
Impedance
>12.5k ohms balanced, 25k ohms unbalanced, DC coupled
Nominal level
-20 dBV (100 mV), -10 dBV (316 mV), 0 dBu (0.775 V), or +4 dBu (1.23 V), configurable
NOTE
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
+4 dBu and 0 dBu are professional audio line level standards.
-10 dBV and -20 dBV are semiprofessional, computer audio, and consumer audio standards.
Maximum level
+19.5 dBu, (balanced or unbalanced) at 1%THD+N
Input gain adjustment
–15 dB to +9 dB, adjustable per input via RS-232 or front panel
Audio output
Number/signal type
2 line-level stereo, balanced/unbalanced
Connectors
(2) 3.5 mm captive screw connectors, 5 pole
Impedance
50 ohms unbalanced, 100 ohms balanced
Attenuation
Fixed output
0%
Variable output
0% to 100%
Maximum level (Hi-Z)
>+21 dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm)
>+15 dBm, balanced or unbalanced at 1%THD+N
Control/remote — switcher
Serial control port
RS-232, 9-pin female D connector, dual port
Baud rate and protocol
9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations
2 = TX, 3 = RX, 5 = GND
Contact closure
(1) 3.5 mm, 10-pole captive screw connector
Contact closure pin configurations
1 = input 1; 2 = input 2; 3 = input 3;... ; 7 = input 7; 8, 9, 10 = GND
IR controller module
IR 701: 30 kHz to 60 kHz input frequency compatibility
Program control
Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
Control — room relay
Number/type
2 momentary or latching
Connectors
(2) 3.5 mm captive screw connectors, 5 pole
Contact rating
24 V, 1 A
Control — projector
Projector control port
RS-232: (1) 3.5 mm captive screw connector, 10 pole
IR: (1) 3.5 mm captive screw connector, 5 pole
General
Power
100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal
Temperature/humidity
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
Operating +32° to +104°F (0° to +40°C) / 10% to 90%, noncondensing
Rack mount
Yes, with included brackets
Enclosure type
Metal
Enclosure dimensions
3.5" H x 17.5" W x 9.5" D (2U high, full rack wide)
(8.9 cm H x 44.4 cm W x 24.1 cm D)
(Depth excludes connectors and knobs. Width excludes optional brackets.)
Product weight
8.5 lbs (3.9 kg)
Shipping weight
18 lbs (9 kg)
Vibration
ISTA 1A in carton (International Safe Transit Association)
Listings
UL, CUL
Compliances
CE, FCC Class A
Warranty
3 years parts and labor
NOTE
All nominal levels are at ±10%.
NOTE
Specifications are subject to change without notice.