Extron MVX 48 VGA A 4x8 VGA and Stereo Audio Matrix Switcher

Description

The MVX 48 VGA A is a 4x8 VGA is designed to route high resolution computer-video and stereo audio signals. Convenient 15-pin HD connectors are used for all computer-video input and output connections. Unbalanced stereo audio is input on 3.5 mm stereo mini jacks, while balanced or unbalanced stereo audio is output on captive screw connectors. Using pre-terminated cable assemblies, such as Extron's VGA with Audio Cables, eliminates crimping and makes installations faster and easier.
Inputs: VGA on female 15-pin HD connectors; audio on 3.5 mm stereo mini jacks
Outputs: Video on female 15-pin HD connectors; audio on captive screw connectors
Ultra-wideband performance - 350 MHz to 500 MHz (-3 dB), depending on model
— MVX Series models in I/O sizes from 4x4 to 12x8 provide a minimum of 350 MHz (-3 dB) RGB video bandwidth, fully loaded. Larger sizes, from 12x12 to 16x16, provide a minimum of 500 MHz (-3 dB) at full performance capability, when one input drives all outputs.
Triple Action Switching™ for RGB delay
— RGB delay blanks the screen when the matrix switcher switches to a new source. The new sync signals precede the RGB signals, so there is no glitch during the transition.
Switches both balanced and unbalanced stereo audio
— Output on captive screw connectors.
Audio input gain and attenuation
— Allows users to set the level of gain or attenuation for each audio input channel, eliminating noticeable volume differences when switching between sources.
Audio breakaway
— Provides the capability to break an audio signal away from its corresponding video signal, allowing the audio and video signals from one source to be switched to different destinations.
Switchable audio output levels
— Output levels can be switched between +4 dBu professional and -10 dBv consumer levels, allowing a mix of professional and consumer-level audio equipment.
View I/O mode
— Easily view which inputs and outputs are actively connected.
QS-FPC™ - QuickSwitch Front Panel Controller
— Provides a discrete button for each input and output, allowing for simple, intuitive operation.
Global presets
— Frequently-used I/O configurations may be saved and recalled from the front panel or via serial control. This time-saving feature allows you to set up I/O configurations and store them in memory for future use.
Front panel security lockout
— Prevents unauthorized use when the matrix switcher is installed in an unsecured environment where easy access is not desirable. In lock-out mode, a special button combination is required to operate the front panel.
RS-232 control port
— Using RS-232 serial commands, the MVX Series can be controlled and configured via the Extron Windows®-based control program, or integrated into a control system. Extron products use the SIS - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The serial port also makes it easy to install firmware updates.
Optional control panels and keypads
— Optional X/Y control panels, bus control panels, and keypads provide the flexibility to control an MVX Series matrix switcher from a remote location.
Optional IR 501 handheld remote control
1U, rack-mountable metal enclosure
Highly reliable, energy-efficient internal universal power supply
— The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with
high demonstrated reliability
.