Extron IN1608

Description

Integrates HDMI, analog video, and audio sources into presentation systems
— The IN1608 provides centralized switching for a wide range of AV sources.
Inputs: Four HDMI; two universal 15-pin HD inputs for RGB, component video, S-video, or composite video; two DTP twisted pair inputs on RJ-45; six stereo balanced/unbalanced audio inputs on captive screw; two mic/line audio inputs on captive screw
Outputs: Three simultaneous video outputs – two HDMI outputs, one DTP
®
or one HDBaseT twisted pair output on RJ-45; one variable stereo audio output on captive screw; one variable stereo audio output configurable as dual mono on captive screw; speaker outputs on 5 mm, 4-pole captive screw connector – IN1608 SA Models or on 5 mm, 2-pole captive screw connector  – IN1608 MA Models
Two DTP inputs, four HDMI inputs, and two universal analog video inputs
— The IN1608 allows for switching between HDMI and analog video sources. Two universal analog inputs accept all standard analog video formats, including RGB, HD component video, S-video, and composite video.
Three simultaneous video outputs
— One DTP or one HDBaseT twisted pair output, and two HDMI outputs are available for driving three displays.
Integrated DTP inputs and output support transmission of video, control, and analog audio up to 330 feet (100 meters) over a shielded CATx cable
— Two DTP inputs and one DTP output support digital signal transmission of HDMI, DisplayPort, DVI, 3G‑SDI, or VGA plus control and analog audio up to 330 feet (100 meters) over a shielded CATx cable, providing high reliability and maximum performance on an easily installed cable infrastructure.
Bidirectional RS-232 and IR pass-through for AV device control
— Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal over DTP connections, allowing the remote device to be controlled without the need for additional cabling. Bidirectional control extension eliminates the need for control system wiring to remote devices.
Remote powering of select DTP transmitters and receivers
— IN1608 IPCP and standard IN1608 models can provide power to select DTP transmitters and DTP receivers over the twisted pair connections, while IN1608 HDBT models can provide power to select DTP transmitters. This eliminates the need for separate power supplies at the remote units.
Compatible with all DTP Series models and DTP-enabled products
— The integrated DTP inputs and output on IN1608 IPCP and standard IN1608 models support mixing and matching with desktop and wallplate transmitters and receivers, as well as other DTP-enabled products to meet application requirements. The DTP inputs of IN1608 HDBT models are compatible with all DTP Series transmitters and DTP-enabled products.
Two mic/line inputs with 48 volt phantom power
— Two mic or line level audio sources can be independently mixed with program audio and embedded onto the HDMI output. Selectable 48 volt phantom power allows the use of condenser microphones.
Mic ducking
— Automatically reduces program audio when a microphone signal is detected, replacing the need for a separate audio ducking processor.
Auto-switching between inputs
— Auto-switching allows for simple, unmanaged installation in locations such as in a lectern or under a conference table. When multiple inputs are active, the switching priority is configurable.
HDMI audio embedding
— Analog input audio signals can be embedded onto the HDMI output signal.
HDMI audio de-embedding
— Embedded HDMI two-channel PCM audio can be extracted to the analog outputs, or multi‑channel bitstream formats can be passed to the HDMI outputs.
Selectable output rates from 640x480 to 1920x1200, including 1080p/60 and 2K
— Available output rates include computer and video up to 1920x1200, including 1080p/60 and 2K.
Advanced scaling engine with 30-bit precision processing and motion-adaptive deinterlacing for signals up to 1080i
— Image scaling and video format conversion are performed at 30-bit precision for enhanced color accuracy and picture detail. Advanced deinterlacing for all interlaced signals up to 1080i delivers optimized image quality.