Evertz 7707MB13-F2 Bi-directional Transceiver 1 SDI, 2 fiber, various io

Description

Hi!  Old spare card from an install.  Never used.  Does NOT include back plate.  Sold as is.
Fits 7700 style card frames.  This is the DUAL FIBER Version, i.e., it transports all this over 2 fibers.
I believe it to be the description below - if you think i am incorrect please advise.
Bi-directional fiber optic transceiver for 1 SDI Video, 2 AES Audio, 1 RS-232/422 and 2 GPI/O
Supports 525 or 625 line 4:2:2 component SDI signals
Supports 32, 44.1, 48kHz AES audio
Supports bi-directional RS-422 rates up to 3Mb/s
Low Audio to Video latency
The 7707MB is a VistaLINK® capable fiber optic transceiver for SDI Video, AES Audio, RS-232/422 and GPI/O signals. This single card module transports one bi-directional SDI Video, two bi-directional AES Audio, one bi-directional RS-232/422 and two bi-directional GPI/Os over a single or dual fiber optic cable. The 7707MB will transparently pass incoming SDI video feeds with embedded AES audio or any other data in the horizontal or vertical ancillary data space. Minimal Audio to Video latency over the transport interface is also achieved. The fiber output is available in 1310nm, 1550nm, CWDM and DWDM wavelengths. The 7707MB occupies one card slot while the dual fiber versions (-F2) occupy two card slots. Both can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
Bi-directional fiber optic transceiver for 1 SDI Video, 2 AES Audio, 1 RS-232/422 and 2 GPI/O
Supports 525 or 625 line 4:2:2 component SDI signals
Supports 32, 44.1, 48kHz AES audio
Supports bi-directional RS-422 rates up to 3Mb/s
Low Audio to Video latency
Dolby® E compatible
Signal transport over fiber uninterrupted by loss of input SDI, AES or Serial Data feeds
Built-in jitter attenuation
Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
Local display of optical signal strength; video, audio, and data presence; video and AES formats; EDH errors
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Bi-directional optical input/output
Accepts any wavelength in the 1270nm to 1610nm range
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller