Cerevo FlexTally Wireless Tally Light System for Video Switcher and Multi-Camera

Description

Cerevo FlexTally Wireless Tally Light System for Video Switcher and Multi-Camera
-  USA Authorized Dealer!
FlexTally is a tally lamp system designed for easy operability and is available at a price range that means even small studios or streaming sites can look to add it to their multi-camera set-ups. FlexTally can be used via either wireless or wired connections for added convenience and its built-in battery allows for portability and use in remote shooting locations.
An easy to set up all-in-one tally lamp system
FlexTally consists of a Station unit that connects to Cerevo's video switcher"LiveWedge" and four Lamp units that are attached to each camera. Each lamp illuminates automatically according to the LiveWedge switching operation. FlexTally is also compatible with other brands' switchers(*1), as well as LiveWedge switcher.
A special software is not required to change the setting
The station unit and the lamps setting can be set or change the assinged lamp ID by pressing Function Button on the station unit or the lamp unit. Because FlexTally does not require any special software so you have the freedom of changing the lamp unit setting on-site in case you want to use more or less lamps.
Can be used via either wireless or wired connection
The wireless connection uses the 433MHz band, which is resistant to obstacles and interference from other wireless signals, to achieve a communication distance of 100m or greater(*2), and also it is possible to daisy chain connections through terminal blocks. FlexTally can be used with cables several hundred meters in length without issue.
A 6-hour battery is built into each Lamp unit so each one can operate completely wirelessly. Wired connections use a standard 2 pin cable, with terminal connectors for easy integration and compatibility.
Specifications
Wireless Connectivity
433 MHz (US/EU)
Wired Connectivity
RS-485 serial connection
Wireless Connection Distance
Approx. 330 ft (line-of-sight)
Battery Operating Time
Lamp unit: 6-12 hours (will vary depending on the lamp brightness and usage environment)
Battery Charging Time
Lamp unit:Approx. 2 hours
Number of Lamps Supported
16 units
Dimensions
Station unit: 5 x 3 x 1" / Lamp unit: 4 x 2.5 x 2"
Weight
Station unit: 5 oz / Lamp unit: 6 oz
Compatible Switchers
Manufacturer
Switcher
Connection
Cerevo
LiveWedge
Ethernet
Blackmagic Design
ATEM Television Studio
ATEM Television Studio Pro HD
ATEM Television Studio Pro 4K
ATEM Productiion Studio 4K
ATEM 2ME Production Studio 4K
※Series compatible
Ethernet
NewTek
TriCaster Mini
TriCaster 460
※Series compatible
Ethernet
Roland
VR-4HD
GPIO*
SONY
MCX-500
GPIO*
NewTek
TriCaster TC1
TriCaster 460
GPIO*
Panasonic
AG-HMX100
AW-HS50
GPIO*
DataVideo
SE-1200MU
GPIO*
StudioCoast PTY LTD
vMix
software